tendersglobal.net
Offer Description
Current research in control theory is focused on utilizing the dynamics of large networks, such as traffic and transportation infrastructure, multi-agent systems, epidemic spreading, and electrification of vehicles, among others. Dealing with a high number of state variables that describe the nodes or edges of these networks, as well as significant uncertainties, calls for new reduction methods that are suitable for networks and can effectively navigate through different scales. Traditionally, the control community has tackled the control of large-scale network systems by seeking distributed control algorithms, where each node applies a control loop locally based on its own information. However, this approach often requires access to local information that may not be available for all nodes in the network. As an alternative to this decentralized approach, the objective of this thesis is to explore “the continuation method” proposed in the ERC Scale-FreeBack project [2,3,4].The continuation method represents a novel approach for approximating large-scale networks described by sets of ordinary differential equations (ODEs) using partial differential equations (PDEs). It is particularly applicable to high-dimensional spatially distributed ODE systems. Examples of such systems include urban traffic networks, ring oscillators, electrical networks, multi-agent robots, gas dynamics, fluid density studies, and electro-mobility networks. In essence, the continuation process can be understood as the inverse of the typical space discretization of PDEs, where a large set of ODEs is used. It begins with a set of coupled or uncoupled high-dimensional ODEs distributed in space, which is then approximated by a PDE using finite differences. Once this approximation is established, boundary controllers can be designed for the PDE instead of controlling each individual control system, or the PDE can be used for analysis purposes [5]. The control designed at the PDE level is subsequently applied to the real system by discretizing it back to the original ODE system
Work program. The project objectives are: to address several open theoretical problems relative to the continuation method and, apply our results to the electro mobility domain. The program considers several theoretical problems to be addressed and a study case:
Theoretical Problems.
• Accuracy, Convergence & Reversibility. The challenge lies in determining the extent to which the PDE approximation can encompass all the impacts of the original ODE and how the choice of continuation order (the highest spatial derivative) influences the accuracy and convergence towards the solutions of the original ODE
• Density-based models. Typically, PDEs involve time and space derivatives, but derivatives can be written with respect to other variables. “Index derivatives” in PDEs are valuable for mobile multi-agent setups with position-based agent states (density-based models, see [5]). We propose to study the dependence of the quality of the obtained model on the chosen position function and to provide some justified guidelines on how to make this choice.
• Density-based models with multi-modal attributes. Another problem of interest concerns a new class of systems that, in addition to the moving spatial agents’ variables, have also additional multi-modal attributes. For example, electrical vehicles in electro mobility networks, are not only characterized by their positions and velocities, but also by additional variables modelling the carried/used energy in the vehicle batteries.
• Local for Global behavior. Another problem to be investigated is how the local interactions affect the global behaviors of the PDE approximation. By local interaction, we mean the characteristics of the local connections in terms of parameters and connectivity. In this project we wish to investigate, at a general theoretical level, how the generic properties of the ODE network (values, connection parameters, graph structure, etc.) affect the global properties of the PDE.
• Multi-modality controlled proxies. The continuation method offers the advantage of recovering a PDE that describes the same physical system as the original ODE network. By using the obtained PDE, it becomes possible to design a continuous control that, when discretized, provides a control law for the original ODE system. In this project, we aim to explore alternative control approaches adaptable to other systems, such as multi-commodity systems with additional attributes like energy carried by particles. This will involve targeting high-dimensional PDE proxies and investigating the existence of approximations and the methodology for constructing the control law.
Study-case: Electro-mobility.
With the increasing adoption of electric vehicles (EVs) by the population, the integration of EVs with city infrastructure and the electrical power supply network presents unresolved critical challenges. Currently, there is a lack of models that capture EV mobility and energy storage, which are crucial for optimizing the energy balance between EVs and the power grid. This project aims to develop models combining EV motion, energy consumption, and storage using continuation models with multi-modality. Additionally, the evaluation, placement, and design of charging stations to support EV power demand will be addressed. The findings will be integrated into the eMob-twin platform, which is being developed in connection with the PoC eMob-Twin project https://www.ins2i.cnrs.fr/fr/cnrsinfo/emob-twin-la-modelisation-au-serv… ). A sample of this platform can be accessed at http://emob-twin.inrialpes.fr
References
1. P. Grandinetti, C. Canudas-de-Wit and F. Garin (2019). Distributed Optimal Traffic Lights Design for Large-Scale Urban Networks IEEE Transactions on Control Systems Technology, Institute of Electrical and Electronics Engineers, 2019, 27 (3), pp.950-963.
2. Denis Nikitin, Carlos Canudas de Wit, Paolo Frasca, “ A Continuation Method for Large-Scale Modeling and Control: from ODEs to PDE, a Round Trip”, IEEE Transactions on Automatic Control, Institute of Electrical and Electronics Engineers, In press
3. Denis Nikitin, Carlos Canudas de Wit, Paolo Frasca. “ Boundary Control for Stabilization of Large-Scale Networks through the Continuation Method”, IEEE Conference on Decision and control Dec 2021, Austin, United States.
4. Denis Nikitin, Carlos Canudas de Wit, Paolo Frasca, Ursula Ebels “Synchronization of Spin-Torque Oscillators via Continuation Method”. Submitted to IEEE transaction on Automatic Control, 2021.
5. Denis Nikitin. “Scalable large-scale control of network aggregates”, PhD, UGA, Sept 2021.
Gipsa-lab is a CNRS research unit joint, Grenoble-INP (Grenoble Institute of Technology), University of Grenoble under agreement with Inria, Observatory of Sciences of the Universe of Grenoble.
With 350 people including about 150 doctoral students, Gipsa-lab is a multidisciplinary research unit developing both basic and applied researches on complex signals and systems.
Gipsa-lab develops projects in the strategic areas of energy, environment, communication, intelligent systems, life and health and linguistic engineering.
Thanks to the research activities, Gipsa-lab maintains a constant link with the economic environment through a strong partnership with companies.
Gipsa-lab staff is involved in teaching and training in the various universities and engineering schools of the Grenoble academic area (Université Grenoble Alpes).
Gipsa-lab is internationally recognized for the research achieved in Automatic & Diagnostics, Signal Image Information Data Sciences, Speech and Cognition. The research unit develops projects in 16 teams organized in 4 Reseach centers: .Automatic & Diagnostic, .Data Science, .Geometry, Learning, Information and Algorithms
.Speech -cognition Gipsa-lab regroups 150 permanent staff and around 250 no-permanent staff (Phd, post-dotoral students, visiting scholars, trainees in master…)
This research will be conducted by the DANCE research team (webpage): DANCE (“Dynamics and Control of Networks”) is a joint team of GIPSA-lab and Inria Grenoble–Rhône-Alpes. Our team has a strong expertise in modeling, estimation and control problems for networks, and specifically for large networks. The research will be part of the ANR project Continuous Methods for the Control of Large Networks (COCOON).
Requirements
Additional Information
Eligibility criteria
Control systems, applied mathematics
Work Location(s)
Where to apply
Contact
STATUS: EXPIRED
View or Apply
To help us track our recruitment effort, please indicate in your email – cover/motivation letter where (tendersglobal.net) you saw this job posting.
Job title: Relocate to Saudi Arabia - Registered Nurse (Medical Ward) Company Sanctuary Personnel Job…
Job title: Medical Consultant / Key Account Manager Pharmaberatung Neurologie (w/m/d) Company STADA Arzneimittel Job…
Job title: Business Analyst - Digital, Payments, Regulatory, Agile - £50,000 - £75,000 base +…
Job title: Pflegefachmann/Pflegefachfrau (Altenpflege) (m/w/d) Company sky Personal medical Job description Personal medical setzen wir…
tendersglobal.net Position description Org. Setting and Reporting This position is located in the Debt Management…
tendersglobal.net The position is to be filled as soon as possible, with an initial contract…
This website uses cookies.